| EWWH370VZPSA1 | EWWH530VZPSA1 | EWWH680VZPSA1 | EWWH880VZPSA2 | EWWHC12VZPSA2 | EWWHC13VZPSA2 | ||||
|---|---|---|---|---|---|---|---|---|---|
| Cooling capacity | Nom. | kW | 369 | 525 | 677 | 884 | 1,180 | 1,295 | |
| Capacity control | Method | Variable | Variable | Variable | Variable | Variable | Variable | ||
| Minimum capacity | % | 20 | 20 | 20 | 10 | 10 | 10 | ||
| Power input | Cooling | Nom. | kW | 64.7 | 94.9 | 119 | 166 | 221 | 247 |
| EER | 5.71 | 5.53 | 5.67 | 5.34 | 5.35 | 5.25 | |||
| ESEER | 7.9 | 8.64 | 8.83 | 8.54 | 8.85 | 9 | |||
| Dimensions | Unit | Depth | mm | 3,750 | 3,822 | 3,822 | 4,508 | 4,750 | 4,874 |
| Height | mm | 2,108 | 2,430 | 2,487 | 2,302 | 2,500 | 2,493 | ||
| Width | mm | 1,179 | 1,287 | 1,303 | 1,579 | 1,610 | 1,769 | ||
| Weight | Unit | kg | 3,247 | 4,082 | 4,346 | 6,310 | 7,530 | 8,250 | |
| Operation weight | kg | 3,375 | 4,349 | 4,660 | 6,900 | 8,300 | 9,200 | ||
| Water heat exchanger - evaporator | Type | Flooded shell and tube | Flooded shell and tube | Flooded shell and tube | Flooded shell and tube | Flooded shell and tube | Flooded shell and tube | ||
| Water volume | l | 96 | 168 | 199 | 320 | 380 | 480 | ||
| Water heat exchanger - condenser | Type | Shell and tube | Shell and tube | Shell and tube | Shell and tube | Shell and tube | Shell and tube | ||
| Compressor | Type | Inverter driven single screw compressor | Inverter driven single screw compressor | Inverter driven single screw compressor | Inverter driven single screw compressor | Inverter driven single screw compressor | Inverter driven single screw compressor | ||
| Quantity | 1 | 1 | 1 | 2 | 2 | 2 | |||
| Sound power level | Cooling | Nom. | dBA | 99 | 105 | 105 | 106 | 107 | 109 |
| Sound pressure level | Cooling | Nom. | dBA | 80 | 86 | 86 | 87 | 88 | 89 |
| Refrigerant | Charge | kg | 100 | 150 | 180 | 290 | 320 | 350 | |
| Circuits | Quantity | 1 | 1 | 1 | 2 | 2 | 2 | ||
| GWP | 7 | 7 | 7 | 7 | 7 | 7 | |||
| Refrigerant circuit | Charge | kg | 100 | 150 | 180 | 290 | 320 | 350 | |
| Power supply | Phase | 3~ | 3~ | 3~ | 3~ | 3~ | 3~ | ||
| Frequency | Hz | 50 | 50 | 50 | 50 | 50 | 50 | ||
| Voltage | V | 400 | 400 | 400 | 400 | 400 | 400 | ||
| Notes | (1) - All the performances (Cooling capacity, unit power input in cooling and EER) are based on the following conditions: evaporator 12.0/7.0°C; condenser 30/35.0°C, unit at full load operation, operating fluid: water, fouling factor = 0 | (1) - All the performances (Cooling capacity, unit power input in cooling and EER) are based on the following conditions: evaporator 12.0/7.0°C; condenser 30/35.0°C, unit at full load operation, operating fluid: water, fouling factor = 0 | (1) - All the performances (Cooling capacity, unit power input in cooling and EER) are based on the following conditions: evaporator 12.0/7.0°C; condenser 30/35.0°C, unit at full load operation, operating fluid: water, fouling factor = 0 | (1) - All the performances (Cooling capacity, unit power input in cooling and EER) are based on the following conditions: evaporator 12.0/7.0°C; condenser 30/35.0°C, unit at full load operation, operating fluid: water, fouling factor = 0 | (1) - All the performances (Cooling capacity, unit power input in cooling and EER) are based on the following conditions: evaporator 12.0/7.0°C; condenser 30/35.0°C, unit at full load operation, operating fluid: water, fouling factor = 0 | (1) - All the performances (Cooling capacity, unit power input in cooling and EER) are based on the following conditions: evaporator 12.0/7.0°C; condenser 30/35.0°C, unit at full load operation, operating fluid: water, fouling factor = 0 | |||
| (2) - Sound level data are measured at entering evaporator water temp. 12°C; leaving evaporator water temp. 7°C; entering condenser water temp. 30°C; leaving condenser water temp. 35°C; full load operation; standard: ISO3744 | (2) - Sound level data are measured at entering evaporator water temp. 12°C; leaving evaporator water temp. 7°C; entering condenser water temp. 30°C; leaving condenser water temp. 35°C; full load operation; standard: ISO3744 | (2) - Sound level data are measured at entering evaporator water temp. 12°C; leaving evaporator water temp. 7°C; entering condenser water temp. 30°C; leaving condenser water temp. 35°C; full load operation; standard: ISO3744 | (2) - Sound level data are measured at entering evaporator water temp. 12°C; leaving evaporator water temp. 7°C; entering condenser water temp. 30°C; leaving condenser water temp. 35°C; full load operation; standard: ISO3744 | (2) - Sound level data are measured at entering evaporator water temp. 12°C; leaving evaporator water temp. 7°C; entering condenser water temp. 30°C; leaving condenser water temp. 35°C; full load operation; standard: ISO3744 | (2) - Sound level data are measured at entering evaporator water temp. 12°C; leaving evaporator water temp. 7°C; entering condenser water temp. 30°C; leaving condenser water temp. 35°C; full load operation; standard: ISO3744 | ||||
| (3) - Allowed voltage tolerance ± 10%. Voltage unbalance between phases must be within ± 3%. | (3) - Allowed voltage tolerance ± 10%. Voltage unbalance between phases must be within ± 3%. | (3) - Allowed voltage tolerance ± 10%. Voltage unbalance between phases must be within ± 3%. | (3) - Allowed voltage tolerance ± 10%. Voltage unbalance between phases must be within ± 3%. | (3) - Allowed voltage tolerance ± 10%. Voltage unbalance between phases must be within ± 3%. | (3) - Allowed voltage tolerance ± 10%. Voltage unbalance between phases must be within ± 3%. | ||||
| (4) - Nominal running current in cooling mode is referred to the following conditions: evaporator 12°C/7°C; condenser 30°C/35°C | (4) - Nominal running current in cooling mode is referred to the following conditions: evaporator 12°C/7°C; condenser 30°C/35°C | (4) - Nominal running current in cooling mode is referred to the following conditions: evaporator 12°C/7°C; condenser 30°C/35°C | (4) - Nominal running current in cooling mode is referred to the following conditions: evaporator 12°C/7°C; condenser 30°C/35°C | (4) - Nominal running current in cooling mode is referred to the following conditions: evaporator 12°C/7°C; condenser 30°C/35°C | (4) - Nominal running current in cooling mode is referred to the following conditions: evaporator 12°C/7°C; condenser 30°C/35°C | ||||
| (5) - Maximum running current is based on max compressor absorbed current in its envelope | (5) - Maximum running current is based on max compressor absorbed current in its envelope | (5) - Maximum running current is based on max compressor absorbed current in its envelope | (5) - Maximum running current is based on max compressor absorbed current in its envelope | (5) - Maximum running current is based on max compressor absorbed current in its envelope | (5) - Maximum running current is based on max compressor absorbed current in its envelope | ||||
| (6) - Maximum unit current for wires sizing is based on minimum allowed voltage. | (6) - Maximum unit current for wires sizing is based on minimum allowed voltage. | (6) - Maximum unit current for wires sizing is based on minimum allowed voltage. | (6) - Maximum unit current for wires sizing is based on minimum allowed voltage. | (6) - Maximum unit current for wires sizing is based on minimum allowed voltage. | (6) - Maximum unit current for wires sizing is based on minimum allowed voltage. | ||||
| (7) - Maximum current for wires sizing: compressor full load ampere x 1.1 | (7) - Maximum current for wires sizing: compressor full load ampere x 1.1 | (7) - Maximum current for wires sizing: compressor full load ampere x 1.1 | (7) - Maximum current for wires sizing: compressor full load ampere x 1.1 | (7) - Maximum current for wires sizing: compressor full load ampere x 1.1 | (7) - Maximum current for wires sizing: compressor full load ampere x 1.1 | ||||
| (8) - All data refers to the standard unit without options. | (8) - All data refers to the standard unit without options. | (8) - All data refers to the standard unit without options. | (8) - All data refers to the standard unit without options. | (8) - All data refers to the standard unit without options. | (8) - All data refers to the standard unit without options. | ||||
| (9) - All data are subject to change without notice. Please refer to the unit nameplate data. | (9) - All data are subject to change without notice. Please refer to the unit nameplate data. | (9) - All data are subject to change without notice. Please refer to the unit nameplate data. | (9) - All data are subject to change without notice. Please refer to the unit nameplate data. | (9) - All data are subject to change without notice. Please refer to the unit nameplate data. | (9) - All data are subject to change without notice. Please refer to the unit nameplate data. | ||||
| (10) - For more details on the operating limits please refer to the Chiller Selection Software (CSS). | (10) - For more details on the operating limits please refer to the Chiller Selection Software (CSS). | (10) - For more details on the operating limits please refer to the Chiller Selection Software (CSS). | (10) - For more details on the operating limits please refer to the Chiller Selection Software (CSS). | (10) - For more details on the operating limits please refer to the Chiller Selection Software (CSS). | (10) - For more details on the operating limits please refer to the Chiller Selection Software (CSS). | ||||
| (11) - Equipment contains fluorinated greenhouse gases. Actual refrigerant charge depends on the final unit construction, details can be found on the unit labels. | (11) - Equipment contains fluorinated greenhouse gases. Actual refrigerant charge depends on the final unit construction, details can be found on the unit labels. | (11) - Equipment contains fluorinated greenhouse gases. Actual refrigerant charge depends on the final unit construction, details can be found on the unit labels. | (11) - Equipment contains fluorinated greenhouse gases. Actual refrigerant charge depends on the final unit construction, details can be found on the unit labels. | (11) - Equipment contains fluorinated greenhouse gases. Actual refrigerant charge depends on the final unit construction, details can be found on the unit labels. | (11) - Equipment contains fluorinated greenhouse gases. Actual refrigerant charge depends on the final unit construction, details can be found on the unit labels. | ||||
| (12) - In case of inverter driven units, no inrush current at start up is experienced. | (12) - In case of inverter driven units, no inrush current at start up is experienced. | (12) - In case of inverter driven units, no inrush current at start up is experienced. | (12) - In case of inverter driven units, no inrush current at start up is experienced. | (12) - In case of inverter driven units, no inrush current at start up is experienced. | (12) - In case of inverter driven units, no inrush current at start up is experienced. | ||||