| RKHBRD011ACV1 | RKHBRD014ACV1 | RKHBRD016ACV1 | ||||
|---|---|---|---|---|---|---|
| Sound pressure level | Nom. | dBA | 43 (5), 46 (6) | 45 (5), 46 (6) | 46 (5), 46 (6) | |
| Refrigerant | Charge | kg | 2.6 | 2.6 | 2.6 | |
| Type | R-134a | R-134a | R-134a | |||
| Dimensions | Unit | Width | mm | 600 | 600 | 600 |
| Depth | mm | 695 | 695 | 695 | ||
| Height | mm | 705 | 705 | 705 | ||
| Casing | Material | Precoated sheet metal | Precoated sheet metal | Precoated sheet metal | ||
| Colour | Metallic grey | Metallic grey | Metallic grey | |||
| Weight | Unit | kg | 144 | 144 | 144 | |
| Power supply | Phase | 1~ | 1~ | 1~ | ||
| Name | V1 | V1 | V1 | |||
| Frequency | Hz | 50 | 50 | 50 | ||
| Voltage | V | 220-240 | 220-240 | 220-240 | ||
| Current | Recommended fuses | A | 25 | 25 | 25 | |
| Notes | (1) - Nominal water flow rate for Dt: 10°C | (1) - Nominal water flow rate for Dt: 10°C | (1) - Nominal water flow rate for Dt: 10°C | |||
| (2) - Maximum water flow rate for Dt: 5°C | (2) - Maximum water flow rate for Dt: 5°C | (2) - Maximum water flow rate for Dt: 5°C | ||||
| (3) - Sound level is valid in free field condition because it is measured in a semi-anechoic room. Measured value under actual installation conditions will be higher due to environmental noise and sound reflections. | (3) - Sound level is valid in free field condition because it is measured in a semi-anechoic room. Measured value under actual installation conditions will be higher due to environmental noise and sound reflections. | (3) - Sound level is valid in free field condition because it is measured in a semi-anechoic room. Measured value under actual installation conditions will be higher due to environmental noise and sound reflections. | ||||
| (4) - Values are sound pressure values measured at all sides (front, back, left, right, top) at 1m distance. The values do not occur simultaneously on all mentioned sides. | (4) - Values are sound pressure values measured at all sides (front, back, left, right, top) at 1m distance. The values do not occur simultaneously on all mentioned sides. | (4) - Values are sound pressure values measured at all sides (front, back, left, right, top) at 1m distance. The values do not occur simultaneously on all mentioned sides. | ||||
| (5) - Sound levels are measured at: EW 55°C; LW 65°C; Dt 10°C; ambient conditions 7°CDB/6°CWB | (5) - Sound levels are measured at: EW 55°C; LW 65°C; Dt 10°C; ambient conditions 7°CDB/6°CWB | (5) - Sound levels are measured at: EW 55°C; LW 65°C; Dt 10°C; ambient conditions 7°CDB/6°CWB | ||||
| (6) - Sound levels are measured at: EW 70°C; LW 80°C; Dt 10°C; ambient conditions 7°CDB/6°CWB | (6) - Sound levels are measured at: EW 70°C; LW 80°C; Dt 10°C; ambient conditions 7°CDB/6°CWB | (6) - Sound levels are measured at: EW 70°C; LW 80°C; Dt 10°C; ambient conditions 7°CDB/6°CWB | ||||
| (7) - Minimum Ssc (=Short-circuit power) value: Equipment complying with EN/IEC 61000-3-12: European/International Technical Standard setting the limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16A and ≤ 75A per phase | (7) - Minimum Ssc (=Short-circuit power) value: Equipment complying with EN/IEC 61000-3-12: European/International Technical Standard setting the limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16A and ≤ 75A per phase | (7) - Minimum Ssc (=Short-circuit power) value: Equipment complying with EN/IEC 61000-3-12: European/International Technical Standard setting the limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16A and ≤ 75A per phase | ||||
| (8) - Zmax: In accordance with EN/IEC 61000-3-11, it may be necessary to consult the distribution network operator to ensure that the equipment is connected only to a supply with Zsys (system impedance) ≤ Zmax | (8) - Zmax: In accordance with EN/IEC 61000-3-11, it may be necessary to consult the distribution network operator to ensure that the equipment is connected only to a supply with Zsys (system impedance) ≤ Zmax | (8) - Zmax: In accordance with EN/IEC 61000-3-11, it may be necessary to consult the distribution network operator to ensure that the equipment is connected only to a supply with Zsys (system impedance) ≤ Zmax | ||||
| (9) - European/International Technical Standard setting the limits for voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current ≤ 75A. | (9) - European/International Technical Standard setting the limits for voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current ≤ 75A. | (9) - European/International Technical Standard setting the limits for voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current ≤ 75A. | ||||